Enjoy Free Shipping on All Orders in the Lower 48 States
3D Printer Haus3D Printer Haus3D Printer Haus

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

$56.99

If the filament in the cartridge runs out, you can get this Refill Filament spool to refill. 

You can simply refill the filament by replacing the filament spool inside the cartridge and the smart chip inserted on the cartridge.

If you use a cartridge too long, the filament feeding rubber roller of the cartridge can be worn out and may cause a filament feeding problem. If so, you may purchase a new cartridge.​ 

In order to maintain the best prices, in the case of purchasing Sindoh filaments and Sindoh spare parts, you must purchase at least three of any items of the Sindoh brand. It can be any combination of spare parts, filaments, and cartridges.

Filament Color: Black

  • Black
  • White
Out of stock
Vendor: SindohSKU: SIND-PLA-7XBKN/AAvailability : In StockIn StockOut of stock

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

If the filament in the cartridge runs out, you can get this Refill Filament spool to refill. 

You can simply refill the filament by replacing the filament spool inside the cartridge and the smart chip inserted on the cartridge.

If you use a cartridge too long, the filament feeding rubber roller of the cartridge can be worn out and may cause a filament feeding problem. If so, you may purchase a new cartridge.​ 

 

Print Temperature(℃) 180 - 220 ℃
Weight(g) 700g
Length(m) 230m
Diameter(mm) 1.75mm
Color 9 (Black, White, Grey, Red, Green, Blue, Yellow, Pink, Purple)

Sample Outputs Using PLA:

1) 'Overwatch' Widow Maker Helment by Stefan, Random Design Studio

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)
Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

2) Wand Stick from 'Harry Potter' by Stefan, Random Design Studio

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

Sindoh 1.75mm PLA Refill Filament for 7X 3D Printer (1.5kg)

PLA (Poly-lactic Acid or polylactide) has easy print-ability which makes it widely used in 3D printing.  

PLA is a thermoplastic aliphatic polyester derived from renewable biomass, typically from fermented plant starch such as from corn, cassava, sugarcane. PLA had the second highest consumption volume of any bio-plastic of the world.

PLA is used as medical implants in the form of anchors, screws, plates, pins, rods, and as a mesh. PLA can also be used as a decomposable packaging material, either cast, injection-molded, or spun. Cups and bags have been made from this material. 

In the form of a film, it shrinks upon heating, allowing it to be used in shrink tunnels. 

It is useful for producing loose-fill packaging, compost bags, food packaging, and disposable tableware. 

In the form of fibers and non-woven fabrics, PLA also has many potential uses, for example as upholstery, disposable garments, awnings, feminine hygiene products, and diapers. 

In 3D printing, PLA (Poly-lactic Acid) filament is the most common and broadly used material. PLA has a strength of about 70 ~ 80% or more compared to ABS filament and can be deformed at high temperatures. 

The melting point of  PLA is around 180°C and unlike ABS, it does not shrink easily even when the temperature decreases, so it is possible to print variety of designs relatively stable and easy.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order NoteEdit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page